Comments on: Shoot RS-80N3 intervalometer remote shutter release cable review

By: Chris Marshall

Chris Marshall — Sun, 19 Nov 2023 16:43:29 +0000

Can I use the intervalometer for a timer delay after positioning the focal point on my touchscreen on a canon r6 ii camera This would be instead of using the cameras built in 2 or 10 second delay with the annoying flashing red lights. So I want to use the cameras settings with the timer delay only on the intervalometer.
Any advise would be much appreciated.

By: Richard Spencer

Richard Spencer — Mon, 12 Sep 2016 03:07:18 +0000

Lost the manual! Thank you! Incredibly clear and helpful.
Rick
Elkton, MD

By: Dave Kennard

Dave Kennard — Sun, 20 Sep 2015 18:35:45 +0000

In reply to Ray Mains.

Hi Ray

I can’t find any company details for them online. I found the box / manual for my remote and that had no company / contact details either. So I can’t help on that I’m afraid.

Given the cost of a new remote against the cost of paying for shipping to China, even if they did offer a repair service, it would probably work out cheaper to just buy a new one anyway.

Dave

By: Ray Mains

Ray Mains — Fri, 11 Sep 2015 23:28:37 +0000

I have this remote and need to send it in for repair, can you help me as to were to send it in to SHoot

By: Dave Kennard

Dave Kennard — Sat, 14 Feb 2015 09:44:46 +0000

In reply to jack o.

Hi Jack

I haven’t seen that issue myself. If the camera’s drive mode is in continuous, that could be the issue. Try setting the camera to single shot drive mode and see if that fixes the issue. (If you’re already using single shot drive mode, I can’t think what the issue would be).

Dave

By: jack o

jack o — Sun, 01 Feb 2015 00:48:38 +0000

I’m trying to use this remote for time-lapse. i have the long set to 0 but when it is supposed to take one picture, it takes two.
Have you had this problem? please help

By: Dave Kennard

Dave Kennard — Sat, 08 Mar 2014 11:36:11 +0000

In reply to Dev.

Hi Dev

It looks like the 6D uses the same remote release cable socket as the 5D2, so it should work on a 6D without any problems.

Regards

Dave

By: Dev

Dev — Thu, 27 Feb 2014 16:34:21 +0000

Hi, do you know if this will work on the 6D?

By: Dave Kennard

Dave Kennard — Wed, 20 Feb 2013 17:17:00 +0000

In reply to Peter Stokes. Cheers for the info, sounds like I got lucky with mine!

By: Peter Stokes

Peter Stokes — Wed, 20 Feb 2013 16:07:01 +0000

In reply to Peter Stokes.

Possibly a better video here https://www.youtube.com/watch?v=BZDFMmEPxfc